Polishing Abrasive Linear Vibrating Screen
Description General Description of L inear vibrating screen Linear vibrating screen is a rectangular screening equipment, his work principle: When the longitudinal installation of the sieve body on the two vibration motor relative rotation, vibration motor at both ends of the eccentric block...
General Description of Linear vibrating screen
Linear vibrating screen is a rectangular screening equipment, his work principle: When the longitudinal installation of the sieve body on the two vibration motor relative rotation, vibration motor at both ends of the eccentric block will produce the rated excitation force, resulting in the horizontal Of the exciting force offset each other, the vertical excitation force generated by the sensor body passed to the entire screen surface, so that the screen surface material by its exciting force to the discharge direction of the hopping linear motion less than the mesh Of the material fell to the bottom, out of the mouth out, after the classification by a linear vibration sieve, a reasonable match sieve to achieve the rationalization of the screening process, to obtain several different particle size of the material to complete the screening operation of the entire material.
Working Principle of Linear Vibrating Screen
The linear vibrating screen uses horizontal vibration motor or special vibration exciter as its vibration source. The horizontal vibration motor and vibration exciter have a eccentric block at the both at their upper and lower sides. The eccentric blocks can generate a three dimensional movement in horizontal, vertical and inclined directions. By adjusting the phase angles of the upper and lower eccentric blocks, the materials on the screen can change the movement locus, achieving suitable screening aims.
1. Pre-sale service:
a. In order to let each customer know better about the performance and requirements, we provide these services
b. To send each potential customer the detailed production information and company profile
c. According the user’s different needs, we work to recommend and guide for them
d. To help them select the appropriate equipment
2. Service during sale:
a. Do good communication with customers, so that each part can exchange the information.
b. Deliver on time as per the contract clause.
3. After-sale service:
a. To track the customer’s feedback after receiving the equipment
b. Any product quality we receive, the technical personnel will guide to solve the problem
c. All the products have three guarantees
d. Provide technical exchanges
e. Do well about the work of maintenance and service