Home > Knowledge > Content
Products Categories
Contact Us

Xinxiang Yinxing Machinery Co.,Ltd

Tel:+86-373-5705111

Fax:+86-373-5705755

Mob:+8615893802694

Add:East Of Zhangzhuang Village, Langgongmiao Town, Xinxiang city, Henan, China (Mainland)

Email:xxyxjx@sina.com

In the installation of linear vibrating screen should be considered
Nov 23, 2018

Linear vibrating screen is used in many industries, in the process of use, especially in the installation, what should operators consider?


The composition of linear vibrating screen mainly includes: screen box, screen mesh, vibration exciter, and its fastening device, transmission device and support device.


When installing linear vibrating screen, attention should be paid to:


1, must choose the wire diameter of the larger screen mesh, because the installation of linear vibrating screen mesh is relatively cumbersome, cutting, the width of the screen mesh and mesh frame can be kept consistent, the length must be 50 to 70mm longer than the mesh frame.


2, when installing, be sure to tighten the screen mesh, because the screen mesh tightness is an important factor affecting the screening efficiency.


3. After installing the net frame into the box as required, remember to insert the growing screen mesh into the corresponding discharge port to avoid mixing.


4, the installation of pressure plate, must pay attention to its flatness, and lined with a strong flexibility of the sponge seal belt uniform locking, because this is not only to prevent the occurrence of mixing level of the key, but also affects the service life of the screen is an important factor.


5. After the installation of linear vibrating screen, a few materials should be used to test the cloth and screening condition of the screen machine. If the materials are evenly transported forward, and the classification is accurate, and there is no mixing phenomenon, it indicates that it can be put into use;

On the contrary, if there is deviation or clustering and other non-uniform phenomenon, should adjust the screen screen screen surface smoothness and uniformity.




6. When adding clear net marbles, the difficulty and mesh number of material screening must be taken into account.


7. If the proportion of materials is large or the mesh number of sieve mesh is high, the mesh number of supporting mesh should be increased under the linear vibrating sieve mesh to play a supporting role, reduce the pressure of materials on the mesh and extend its service life.




Related Industry Knowledge

Learn More Information About Our Products Know More
Copyright © Xinxiang Yinxing Machinery Co.,Ltd All Rights Reserved.