Home > Knowledge > Content
Products Categories
Contact Us

Xinxiang Yinxing Machinery Co.,Ltd

Tel:+86-373-5705111

Fax:+86-373-5705755

Mob:+8615893802694

Add:East Of Zhangzhuang Village, Langgongmiao Town, Xinxiang city, Henan, China (Mainland)

Email:xxyxjx@sina.com

The air volume of the dust collector is too large, and the dust at the intake is inhaled too much.
Aug 23, 2018

The air volume of the dust collector is too large, and the dust at the intake is inhaled too much. Causes of failure and treatment methods:

u=1692697241,2730455622&fm=26&gp=0.jpg

1. Throttle shift: adjust and fix the throttle.

2. The design volume of the dust collector is too large: replace the dust collector.

Fan mismatch: replace fan.

(4) filter bag breakage and fall off: check the filter bag.

(5) the amount of dust in the filter bag is too small.

The ash removal cycle is too short, the injection width is too wide, and the pulse control instrument is adjusted to prolong the ash removal cycle.

The ash cleaning intensity is too high and the injection pressure is adjusted.

Dust at the outlet of the dust collector. Causes of failure and treatment methods:

A) the filter bag is damaged and shedding: check the filter bag;

B) the sealing of filter bags is not good: check for re installation.

C) damage to flower panels: maintenance of flower panels;

D) dust particle size is too small: replace filter material;

E) the ash removal cycle is too short, the injection width is too wide, and the pulse control instrument is adjusted to prolong the ash removal cycle.

F) the intensity of ash cleaning is too strong and the injection pressure is adjusted.


Related Industry Knowledge

Learn More Information About Our Products Know More
Copyright © Xinxiang Yinxing Machinery Co.,Ltd All Rights Reserved.